|
Autai . China. PTFE
and Teflon
PTFE :: Teflon
| |
>>
PTFE :: Teflon
 PTFE Sheet
Skived PTFE Tape : Skived PTFE Film : Skived PTFE Sheet : Molded PTFE Sheet : Extruded PTFE Sheet : Filled PTFE Sheet :
the PTFE Sheet can be made in any thickness from 0.2mm up to 100mm. PTFE Sheets technology makes it. possible to make in-between sizes. the Teflon Sheets is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets (asbestos substitute) and diaphragms, including complex stamped gasket configurations. It comes in sheets from 300mm square to rolls 1500mm wide. Standard sizes are 1200mm square, 1000mm square, Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Sheet is ideal for cutting into bIanks for machining into smaller parts.
|
PTFE Rod
Small PTFE Rod : Extruded PTFE Cylinder : Extruded PTFE Rod : Molded PTFE Rod : Filled PTFE Rod :
PTFE Rod is available in both virgin grades and reprocessed for less demanding applications. Surf Technologies PTFE rods in all standard sizes from 2mm diameter up to 400mm in diameter. Rod is inventoried in twelve foot lengths so it can be cut into 200mm up to 2000mm lengths. the rods is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of Rods are required. Various fillers are available to modify the properties of PTFE ( Teflon ) to meet application requirements. Fluoro-Plastics stocks huge inventories so that same day shipment of most standard sizes is available.
|
PTFE Tube
Extruded PTFE Bush : Extruded PTFE Pipe : Molded PTFE Tubing : Bull PTFE Tubing : Filled PTFE Tube :
PTFE Tubing is a leader in the manufacture of heavy walled tube, both in standard sizes. the PTFE tube is used in fluid handling applications for high temperature acids and caustics or where contamination is an issue, such as in wire braided hose. In applications where PTFE 's excellent insulating properties are needed heavy walled tube is the shape of choice, e.g. in spark plugs for stationary generators, coaxial spacers, connectors. Because drilling a precise hole in longer PTFE ( Teflon ) lengths is impossible, extruded tube is the best way to insure uniform wall thickness throughout the length of the tube. Various fillers are available to modify the properties of PTFE ( Teflon ) to meet application requirements.
|
PTFE Gasket
CNC Gasket Tubing : CNC PTFE Gasket :
PTFE Teflon Gaskets ( Teflon PTFE Washers ) has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly gasket. Gasket has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics gasket.
|
Extruded Abnormal PTFE
PTFE Hose
PTFE Hose :
PTFE Hose has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly Hose. PTFE Hose has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics.
|
PTFE Joint Sealant
PTFE Joint Sealant :
F4-1880 Expanded PTFE Teflon Joint Sealant ; Service Limits ph range: 0-14 ; Temperature Limits: -260~ + 260 °c(-500/+500°F); ; Pressure Limit: 20Mpa (or 2900 psi; or 200kgf/cm2) ; Material: 100% PTFE, soft and excellent elasticity. ; Density: 0.7~0.8g./cm3 (43~49.5lbs./cu. ft.3) ; Elongation: 20% ; Matrix Tensile Strength: 30Mpa (4260 psi) ; Creep Relaxation (ASTM F38): 51% ; Sealablity (ASTM F 37A): 0.1 ml/hr
|
|
