|
PTFE PRODUCT
| |
PTFE PRODUCT
|
|
|
|
Teflon
& PTFE Rod |
|
| |
PTFE Rod : Extruded PTFE Rod, Molded
PTFE Rod, Filled PTFE Rod. PTFE Rod
is available in both virgin grades
and reprocessed for less demanding
applications. Surf Technologies PTFE
rods in all standard sizes from 2mm
diameter up to 400mm in diameter.
Rod is inventoried in twelve foot
lengths so it can be cut into 200mm
up to 2000mm lengths. the rods is
generally used as machining stock
for all kinds of chemical,
electrical and mechanical components
where the outstanding performance
characteristics of Rods are
required. Various fillers are
available to modify the properties
of PTFE ( Teflon ) to meet
application requirements. Fluoro-Plastics
stocks huge inventories so that same
day shipment of most standard sizes
is available. |
|
| |
|
|
| |
|
|
|
|
|
Teflon &
PTFE Sheet |
|
| |
PTFE Sheet : Skived PTFE Sheet, Molded
PTFE Sheet, Filled PTFE Sheet. the
PTFE Sheet can be made in any thickness from 0.2mm up to 100mm.
PTFE Sheets technology makes it. possible to make in-between
sizes. the Teflon Sheets is ideal as a slide surface, for chute
liners, other kinds of liners, or for cutting or stamping into
gaskets (asbestos substitute) and diaphragms, including complex
stamped gasket configurations. It comes in sheets from 300mm
square to rolls 1500mm wide. Standard sizes are 1200mm square,
1000mm square, Unless otherwise specified, the edges are not
trimmed and all plate is oversized so that blanks can be cut
without significant kerf waste. All material is white. Sheet is
ideal for cutting into bIanks for machining into smaller parts.
|
|
| |
|
|
| |
|
|
|
|
|
Teflon &
PTFE Tube |
|
| |
PTFE Tube : Extruded PTFE Tube, Molded
PTFE Tube, Filled PTFE Tube. PTFE Tubing
is a leader in the manufacture of heavy walled tube, both in
standard sizes. the PTFE tube is used in fluid handling
applications for high temperature acids and caustics or where
contamination is an issue, such as in wire braided hose. In
applications where PTFE 's excellent insulating properties are
needed heavy walled tube is the shape of choice, e.g. in spark
plugs for stationary generators, coaxial spacers, connectors.
Because drilling a precise hole in longer PTFE ( Teflon )
lengths is impossible, extruded tube is the best way to insure
uniform wall thickness throughout the length of the tube.
Various fillers are available to modify the properties of PTFE (
Teflon ) to meet application requirements. |
|
| |
|
|
| |
|
|
|
|
|
PTFE
Gasket |
|
| |
PTFE Gasket has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly
gaskets. PTFE gasket has the lowest coefficient of friction of all known
solid materials. It has the best electrical properties of all plastics
gasket.
|
|
| |
|
|
| |
|
|
|
|
|
PTFE Hose |
|
| |
PTFE Hose has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly
Pipe. PTFE Hose has the lowest coefficient of friction of all known solid
materials. It has the best electrical properties of all plastics piping.
|
|
| |
|
|
| |
|
|
|
|
|
PTFE
Joint Sealant |
|
| |
PTFE Joint Sealant has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly
joints sealant. PTFE Joint Sealant has the lowest coefficient of friction of all known solid
materials. It has the best electrical properties of all jointing sealant.
|
|
| |
|
|
| |
|
|
PTFE PRODUCT
